Official 7" Raspberry Pi Touch Screen FAQ
Hi! I got my official 7" touchscreen display and it work very well! Since I need to place an additional glass lens on it, I would like to know if it is possible to increase the touch sensitivity (for...
View Articledot3k wlan module
Morning all, I was wondering if anyone has managed to get the wlan.py module to work for their dot3k? As I can not seem to get it to work on my Pi3's in built wifi or on a usb wifi dongle on my Pi2's....
View ArticleColour module on python
Thanks for the info, I'll try that branch soon.Clear gives me values on the range of -32k + 32k I think some normalization on that value is missing right?
View ArticleNeed to cancel my order
I purchased RPi3-Kit a few days ago, but I noticed something is missed in my order.So could you cancel my order, please?I'm afraid that Pi already shipping (cuz I live in South Korea)Order number is...
View ArticlePibow 3
are these recently ordered Pi from us for all three of you? ... the HDMI port should not be as high as it is in your pic. Granted there is a tolerance for perspex thickness I'm not sure it can make up...
View ArticleOfficial 7" Raspberry Pi Touch Screen FAQ
I don't think that would be possible I'm afraid doug!
View ArticleDead Raspberry Zero return
Please send an e-mail to support@pimoroni.com including the troubleshooting steps you've tried and order details!
View ArticleOfficial 7" Raspberry Pi Touch Screen FAQ
Thanks jon.. so you mean there is no chance at all to modify the capacitive touch screen sensitivity? Perhaps the drivers are precompiled and no configuration parameters are supplied in Raspbian Jessie?
View ArticleFlotilla "ShipShape" Update: Dip in and try the pre-release ( NEW: Updated...
sigh you are correct, current rockpool does not work in Epiphany, which seems to break if you look at the code from less than an inch away. For the time being it might be best to install and use an...
View ArticlePibow 3 differences from 2?
I notice that the Pibow (both regular and Coupé) have been updated in some way for the Raspberry Pi 3. According to the product page: "We've redesigned Pibow to be compatible with both the Raspberry...
View ArticlePibow 3 differences from 2?
I think the SD card slot has been altered to accommodate the change to a friction fit holder, where you need slightly better access to extract the card. Gordon
View ArticleKickstarter PiCade speaker issues
Hi! I got a PiCade in the Kickstarter a few years ago and assembled it when i got it, then but i never started it, or put in a raspberry pi. Just took it out and installed a pi with retropi and...
View ArticleClik here to view.
Official 7" Raspberry Pi Touch Screen FAQ
Leonick: Yea, not much documentation at all. I even had trouble figuring out if and what for I needed the four jumper cables... Most install guides just say "two jumpers this way" or "four jumpers...
View ArticleOfficial 7" Raspberry Pi Touch Screen FAQ
Another area not fully documented is the power connection. Here is my take on the power connections that I've never seen stated in the following way: You can power the display from two different...
View ArticleClik here to view.
Pibow 3 differences from 2?
mattgemmell: Are the first (bottom) four layers of the Coupé kit the same as the corresponding layers in the regular Pibow, with just the top piece being different? yes, the Coupé includes layer...
View Article