Problem with Three Port USB Hub with Ethernet
it could be a power related issue... are you connecting USB devices to the adapter and if so what are they? how are you powering up the Pi itself?
View ArticleProblem with Three Port USB Hub with Ethernet
I had a Huawei 3G modem attached to the adapter, but removed it now and tested again, same results. Just PiZero and ethernet adapter connected now. And like I said the problem is reproducible also...
View ArticleRaspberry Pi and LCD Display contained in one case
Does anyone know where I might be able to get my hands on a case that is able to have the Raspberry Pi and the LCD display screen. I was hoping to get a Qubit case, but the website domain for them...
View ArticleClik here to view.
Trinket 3.3V not working
Hi, I've tried connecting my trinket to my macbook pro, but wasn't able to upload code (Blink example) with the arduino IDE. I found out that the trinket doesn't really like USB 3.0 ports so I tried...
View ArticlePiGlow on Arduino - what am I doing wrong?
Hi. I'm trying Gadgetoid's Arduino library on a Nano, which I'm coding in the Arduino IDE 1.6.9. However I'm having some issues. I'm a total novice at C - and pretty new to Arduinos generally, so it's...
View ArticleUnicorn pHat on headless Pi0 (tea-time teaser)
I am getting really confused now ... I have tried uncommenting both "hdmi_drive=2" and "hdmi_force_hotplug=1" both together and each one in turn ... with no joy. The unicorn phat just wont display...
View ArticlepHAT DAC and Class D amplifier?
Hi! Sorry for bring this thread up! (And sorry for my english!) Did you wired the dac to the amp? How about the sound quality? I was thinking to do something similar, or maybe with a headphone...
View ArticleScroll pHAT: scroll speed, brightness etc
Hi. Just having some fun fiddling with some python scripts on the scroll phat. Here's what I'm wondering: What is the maximum brightness? I love the way it has finer control of brightness than the...
View ArticlePiGlow on Arduino - what am I doing wrong?
I reckon it's a power related issue... how did you wire the piglow to the nano?
View ArticleUnicorn pHat on headless Pi0 (tea-time teaser)
Could you try commenting out the changes in /boot/config.txt and running: curl -sS get.pimoroni.com/unicornhat | bash ... it should reimplement some of the changes @sandyjmacdonald recommended mind...
View ArticleTrinket 3.3V not working
Disconnect GPIO 2 I think it is, if it's connected, it will never go into boot loader mode while that is connected, took me forever to figure that one out on mine. I also pulled hair out for a half a...
View ArticleTrinket 3.3V not working
Actually I don't have any cables connected to the pins just the usb cable which is connected to my pc. When I was trying to repair the bootloader I've used the wiring diagram of adafruit.
View ArticlePi zero complete starter kit - but missing Pibow Zero
Hello, I bought Pi zero complete starter kit. but there isn't Pibow zero. Belows are the product detail in your site. This kit includes:•Raspberry Pi Zero•Pibow Zero --> not included..•2x20 0.1"...
View ArticlePicade Missing parts
Hello.I ordered a Picade from you and got the box yesterday but some parts are missing: 1 hinge not 2 2 cable ties not 32 cable ties mounts not 319 M4 bolts not 24 34 M4 nuts not 38 I don't want to...
View ArticlePiGlow on Arduino - what am I doing wrong?
It's wired as per the directions on the Git page - and connected using solder-less breadboard, powered with a breadboard power supply (https://www.amazon.co.uk/gp/product/B00YUY8KLI/).
View ArticlePiGlow on Arduino - what am I doing wrong?
OK, I thought you might have only one 3.3V line connected. To clarify though, the nano and piglow are powered from the same source right? I ask because for i2c to work properly the slave and master...
View ArticleUnicorn pHat on headless Pi0 (tea-time teaser)
I don't know what doing the above did ... I don't care. I now have a Unicorn pHat working as it should. However I think I know where I went wrong with Sandy's suggestions. I simply uncommented them...
View ArticlePiGlow on Arduino - what am I doing wrong?
Both the PiGlow & Nano are powered by the same breadboard PSU. But there are two feeds from that particular PSU (left & right, each either 3.3V or 5V). It's plausible I've used a ground line...
View ArticleUnicorn pHat on headless Pi0 (tea-time teaser)
I don't think the order matters. But the 'get' installer does things a bit differently, part in the /boot/config.txt and part configuring the alsa mixer. This means that if you want the analog audio...
View ArticlePi zero complete starter kit - but missing Pibow Zero
Shoot an email to support@pimoroni.com and they'll sort it out for you!
View Article