Quantcast
Channel: Pimoroni Buccaneers - Latest posts
Browsing all 53830 articles
Browse latest View live
↧

Help installing Phat Dac

Are those wires soldered to the pHAT DAC or merely passed through the holes? If the later you're never going to get reliable contacts that way. The other thing I would advise is to try with a SD...

View Article


CCTV Kit

I'll look out for the assembly guide later today! I did remove the protective film on the camera. I am going to exchange the camera and try again. Thank you! :D

View Article


Help installing Phat Dac

I have pins soldered to phat dac, then jumper wires are added onto the pins. This is so just to test. Will do direct solder to another new Zero Pi after everything works out on my test one. Pic:...

View Article

Help installing Phat Dac

I can only advise again that you try with Raspbian first. If it does work then you'll know you can discard an issue on the hardware side and go back to getting it to work with your preferred distro.

View Article

New 2.x Configurable Keyboard/Gamepad Firmware

Hi I've done some testing with this new firmware b2.3 and have found the following. Sound volume on reboot or shutdown.Altering the volume with the buttons does not appear to get saved as the value...

View Article


Help installing Phat Dac

For what it's worth, I installed DietPi to check it out for myself and the problem is that /boot/config.txt is not a resource you can edit directly. Instead, you need to edit /DietPi/config.txt and...

View Article

Unicorn HAT - latest Raspbian

Hi, Was just trying to get an old UH project running on the latest Raspbian and notice the UH was outputting garbage. So I tried to run a few of the examples, but to the same result. I work over...

View Article

Image may be NSFW.
Clik here to view.

Unicorn HAT - latest Raspbian

Ah looks like this may be it: New Unicorn Hat not working It looks like there are two problems: Garbled/intermittent display on Unicorn HAT/PHAT On Raspbian 2016-05-10 / NOOBS 1.9.1 booting to X seems...

View Article


Help installing Phat Dac

Installed a full raspbian jessie, card worked well. Hardware is sound, connection-wise. I used speaker-test to play different frequencies to different channels. Thus, would I get an assistance here to...

View Article


Help installing Phat Dac

as far as I can you need to manually edit /DietPi/config.txt and add dtoverlay=hifiberry-dac ... and probably comment out: dtparam=audio=on basically, you need to follow the manual install steps...

View Article

Unicorn HAT - latest Raspbian

Yes, some recent changes in Raspbian have caused a bit of a headache. Things should be back in control using the current 'one-line-installer': curl -sS get.pimoroni.com/unicornhat | bash ... at least...

View Article

Unicorn HAT - latest Raspbian

Ah cool cheers. Couldn't remember when I last grabbed the repo. I've made a note to myself in the code to remind me next time I forget :)

View Article

Help installing Phat Dac

Ok, got it to work. In dietpi there is no 'dtparam=audio=on' but there is 'dtparam=audio=off' that I did comment out and all is good. Thus, thank you! PS: A side question. I have a I2C display, will I...

View Article


New 2.x Configurable Keyboard/Gamepad Firmware

Hi! Loaded b2.3: Sound volume set via serial and saved does now 'stick' with a reboot! (yay!) Still unable to get any adjustment via the buttons, but need to play around more with this. Thanks for...

View Article

Country banned from shipping

Hello, I noticed that Pimoroni does not ship to Brazil "due to trade restrictions or high level of fraudulent activity". I don't know if it's because of trade restrictions (which I find unlikely) or...

View Article


Help installing Phat Dac

yes, that will be fine.

View Article

Unicorn HAT - latest Raspbian [ SOLVED ]

Added the SOLVED tag for other people who might stumble across this. Glad you're back up and running!

View Article


New 2.x Configurable Keyboard/Gamepad Firmware

Hi Did you remap the volume buttons as I found that by default they are set to 'u' and 'd'. I copied the config from the top of this thread as shown below as I havent changed my bindings from the...

View Article

Unicorn HAT - latest Raspbian [ SOLVED ]

Cheers, doing a talk on Arduino and Pi at my Maker Space today, so couldn't be without some shiny stuff!

View Article

Country banned from shipping

As I understand it, the main problem with shipping to Brazil is the import tax. Unfortunately the best shipping in the world can't stop someone rejecting a parcel at the border when they see the tax...

View Article
Browsing all 53830 articles
Browse latest View live