Pi Zero, Adafruit 2.8Tft, Phat Dac
Thanks for the replys guys, pleased to say that the phat dac is working on the test that comes up after instal, but, how do I play the mp3 files that I have copied to the Pi Zero music folder. If this...
View ArticleClik here to view.
Scroll-phat problems
Hi all, I have a scroll-phat that I cant seem to get working on my raspberry pi 0 (jessie raspbian), I have this error when I try to run an example Traceback (most recent call last): File...
View ArticleData Accuracy and units of data of the EnviroPHAT
I guess smoothing over inaccurate data gives more or less the accuracy on truncation anyway. Given that the noise has some standard distribution.
View ArticleRaspberry Pi Zero and Unicorn Hat
I'm using Jessie lite it's a headless Pi it's a ZERO, there is no analog sound I just swapped the working SDHC-Card and the Unicorn from a RPi2 to the RPi0.
View ArticleScroll-phat problems
your soldering looks fine to me (though I'd say you run your iron a little hot perhaps). How have you installed the library? and have you checked that i2c is enabled?
View ArticleOpenLog - Logging to card stopping at random times
Flashing the 'minimal' version of the firmware seems to have resolved the issue.
View ArticleZero LiPo + Switch
Quick update for the benefit of anybody else trying this - it works straight away! Just soldered the slider switch into place, trimmed the excess from the pins of the switch (to avoid shorting...
View ArticleScroll-phat problems
Thanks for the feedback- yes I installed using the Bash one-line installer-installed and rebooted a few times too. However I am going to check i2c is enabled and update from there.
View ArticleAdafruit powerboost 1000c not working with battery
I bought a powerboost 1000c for a battery powered project but it doesn't work with just a battery connected. When I connect the mains it will work but not without it. When the battery and mains are...
View ArticleScroll-phat problems
hmmm I have enable i2c, and I still have the same error $ python test-all.py Traceback (most recent call last): File "test-all.py", line 5, in <module> import scrollphat File...
View ArticleScroll-phat problems
Could be a dud aka doa, but it could also be the soldering on the zero itself. ... do you have any other add-on that uses i2c? if not inspect very closely the 6 leftmost (2x3) joints on the left hand...
View ArticleClik here to view.
Scroll-phat problems
I do not have another add on unfortunately- I have had a look and some of the soldering looks a bit blobby-I might try resoldering. I did run a Pin Test using wiring pi however-do you think this is...
View ArticleClik here to view.
My Pitendo.....Please share your thoughts
I just wanted to share my Pitendo. I still have some mods I want to make but here is what I have so far. Started like this... 0716160915a.jpg1024x576 145 KB Ended up like this......
View ArticleScroll-phat problems
I don't think a software test can tell you anything about the state of the contact, at least without attaching something to it to confirm the result. What can is a multimeter, by checking continuity...
View ArticleSome buttons and joystick stopped working correctly
Run into a problem recently. My Picade was working fine and I've played several hours on it but then for no clear reason one of the buttons stopped working. Then a while later the joystick wouldn't...
View ArticleEnviroPhat "cannot import name light"
I recently bought a Pi Zero and an Envirophat. I've soldered on the headers (first time soldering something this small) and connected the two. As far as I can tell all pins have a good connection, but...
View ArticleSchematics for Explorer Hat Pro
I have been trying to find schematics for my Explorer Hat Pro. I downloaded the .fzpz file from Github and installed Fritzing but when I try to view the schematic I just get a picture of the HAT. Am I...
View ArticleNew Artwork for Picade Cabinet
you must be crazy :D but I'm definately fan of your work ;)
View ArticleClik here to view.
Unicorn Hat not working ws2811_init not working
I just got a new Unicorn hat and i am encountering Traceback (most recent call last): File "./paint.py", line 13, in <module> import unicornhat as unicorn File...
View ArticleUnicorn Hat not working ws2811_init not working
Interesting, this shouldn't happen anymore for all the reasons I've come across- it's possibly the error could be one we haven't come across since the error code -1 is the code returned for every...
View Article