Which HAT do I need to build this IR transmitter?
iMO, you really shouldn't build a permanent solution on a breadboard, wires are bound to get loose. These will provide clear from the USB/Ethernet ports if that is what you mean by fitting the Coupé:...
View ArticleWhich HAT do I need to build this IR transmitter?
Ok then, I will listen to you and I will solder directly on adafruit Perma-Proto. My main concern is that if I wrongly wire the schema, will I be able to undo and solder again or I need to buy another...
View ArticleWhich HAT do I need to build this IR transmitter?
Desoldering single points is not that much of a problem. I haven't tried the perma-proto myself but expect the contacts to be high quality and survive such treatments.
View ArticleWhich HAT do I need to build this IR transmitter?
You only need the 'No EEPROM' version incidentally. In fact you might want to consider using a stackable header such as:...
View ArticleWhich HAT do I need to build this IR transmitter?
Thanks RogueM for pointing me this link ! It's nice because I do not solder directly on the Raspberry but on that HEADER, right ? I will also get a breadboard for testing out my connections before...
View ArticleWhich HAT do I need to build this IR transmitter?
No, you'd still use the perma-proto breakout to access the GPIO you need, but using a header with extra tall pins allows you to stack a HAT on the top of your IR circuit if you wanted to at a later...
View ArticleWhich HAT do I need to build this IR transmitter?
Sorry, I misspoke what I wanted to say. I thought that HEADER would clip directly on the RPi, and then I would solder my perma-proto on it, rather than soldering the perma-proto on the RPi itself....
View ArticleWhich HAT do I need to build this IR transmitter?
Oh, yeah, I wouldn't recommend soldering directly on a RPi2. ... I speak French btw, so if you get stuck feel free to PM me, though your English is perfect :-)
View ArticleWhich HAT do I need to build this IR transmitter?
Oh thanks :) I think it's better to continue here for sharing informations to those who face the same questions, even if it would be way more convenient for me to speak in french :) So, to sum it up,...
View ArticleScroll pHAt Not working at all
The one-line installer up now should get the Scroll pHAT running on Jessie. For Wheezy it's a big can of worms and the plan is to do away with the PIL/pillow requirement. ... in the meantime, as...
View ArticleWhich HAT do I need to build this IR transmitter?
Yes, the perma-proto comes with a header. If you don't plan to add a HAT then the other one is not necessary. Be aware that you will not be able to desolder a 2x20 header later on though. The pibow...
View ArticleMini Starter Kit Delivery
Hi, looks like I have a similar problem.Jessie is installed and updatedtried various USB cablesconnected a powered USB hub in-betweenand still rockpool looks in vain.libboost installedanybody have any...
View ArticleStruggling to connect using jessie
I am using a PI B series 2 with Jessie.Have ran sudo apt-get update and then upgrade.Have down the git clone ...flotilla-offline and sudo ./installMy dock, barometer and light module are all...
View ArticleConnecting - error while loading shared libraries: libboost_filesystem.so.1.50.0
Running Jessie and it just says it's connecting. Run flotilla on the CLI and only get this error - flotilla: error while loading shared libraries: libboost_filesystem.so.1.50.0: cannot open shared...
View ArticleStruggling to connect using jessie
Same here! Tried all the suggestions on the forum...
View ArticleRaspberry Pi Zero died out of nowhere
It's getting weirder and weirder! The Zero seems to be working again, the ACT LED starts flashing like it would when booting when I power it up with an SD card and the 3.3V pin gives 3.3V again! It is...
View ArticleStruggling to connect using jessie
I am getting the same issues too, i did follow the other thread to update various things but still getting the message connecting!
View ArticleStruggling to connect using jessie
I bought a Pi 2 install Jessie as per instructions and nothing?
View ArticleConnecting - error while loading shared libraries: libboost_filesystem.so.1.50.0
libboost-filesystem1.50.0 shouldn't be needed on Jessie (libboost-filesystem1.55.0 is used instead). What do you mean by running flotilla on the CLI, call /usr/bin/flotilla manually?
View ArticleClik here to view.
Connecting - error while loading shared libraries: libboost_filesystem.so.1.50.0
Capture.PNG1266x86 5.13 KB
View Article