Clik here to view.
Display-o-Tron: display IP while waiting for passphrase
realpy: I must to see my work but i remember that the debian setupcrypt doesn't work n'y default but must be correct... I had no problems with a standard Debian Jessie on a Raspberry Pi 2 using...
View ArticlePicade Board Firmware Update
HiIm trying to compile the latest Picade firmware using Arduino 1.6.5, board set to Leonardo.I see it needs Keyboard.h so I found and installed that library.However, on compile I get an error that the...
View ArticlePicade Board Firmware Update
Try dropping the reference to Keyboard.h You shouldn't need a separate library at all, as far as I know. I think somewhere between Arduino IDE 1.6.5 and 1.6.7 the Leonardo was changed/broken and...
View ArticleFona 808 - Can't get to boot - Flashing blue LED
If it was purchased from us, you can return it to us. Just drop us an email to support@pimoroni.com and we'll sort you out.
View ArticleClik here to view.
Noisemaker
floyduk: What actually makes the noise though? I see lots of inputs on there. What's the output? I don't really understand what the noisemaker is meant to be. The Noisemaker uses the Flotilla inputs...
View ArticlePicade Board Firmware Update
Blimey!That was quick....Yes, commenting out that line lets the thing compile.... Thanks very much :) Phil
View ArticleFirst Impressions and Stuff
Following Ian's invitation to try sniff I have done just that over the past few days, and he has been very helpful to me in getting it going on my mac. I think it is a great language to use to control...
View ArticleNoisemaker
Ahh.. I see. Is this visible somewhere yet? Cause at the moment all I see when I connect to the cookbook is mood light and weather station.
View ArticleSet absolute value for motor?
Hi! I have a motor connected to a Lego rope winch. When I just connect an input device to the motors speed I will run into problems when the cable is completely drawn in. What I need is either a...
View ArticleRaspberry pi zero phat dac
Sorry, maybe I should have precised better that splitting it in 2 was really what worked for me. On one line (even with the strange character removed), I was still getting no sound. I have no clue...
View Article3D-Printing items for Flotilla & Raspberry Pi
This lego motor mount is exactly what I need, thanks for that! Unfortunatly my 3D printer will probebly never arrive (kickstarter buccaneer).
View ArticlePhat DAC install
Just thought I'd stop lurking + sign up to thank you all for the great set-up info. Currently waiting for soldering kit to arrive so I can get on with setting up my pHAT DAC - in the meantime it's...
View ArticleScroll pHAT errno 110
I have two of the scroll pHATs, one works fine, but the other one gives an error as follows : pi@atlas:~/Pimoroni/scrollphat $ python test-all.pyTraceback (most recent call last): File "test-all.py",...
View ArticleScroll pHAT errno 110
It's very likely the soldering job. Have you soldered the pHAT on the Pi directly or to a header? Either way, make sure you touch up/verify the 6 pins (2x3) to the left, both on the Pi and the pHAT,...
View ArticleClik here to view.
Scroll pHAT errno 110
Thanks for the quick response! The pHAT that doesn't work is on a female header, the one that does work is on a male header, with a ribbon attached... I'm testing it on the one Pi, so the environment...
View ArticleIntroduce yourself!
Hey folks! Dan here.. I'm currently involved in small indie game development projects, music and increasingly tinkering with Linux/Raspberry Pi. Pride myself on being slow, somewhat laconic, but...
View Article3D-Printing items for Flotilla & Raspberry Pi
Well Done!! I imagine you will come up with many more creative items in the future ~ Would enjoy seeing them :-) CHEERS!!
View ArticleScroll pHAT errno 110
The soldering job looks good from here. Try the following: sudo apt-get install i2c-tools i2cdetect -y 1 it should output a map of i2c addresses with 0x60 highlighted. If not then that means the...
View ArticleScroll pHAT errno 110
Ok, looks like I have a dodgy pHAT then. On the working one, I get the map result and voltages as expected. On the non-working one, the map takes ages to draw and gets a "--" result on the 0x60...
View ArticleScroll pHAT errno 110
hum, that's very strange... could you post a pic of your setups because it almost seems like the rows of pins are switched around. ... thinking about it I'm not sure I picture the setup you made with...
View Article