Black Hat Hack3r does not work
You are almost certainly shorting something. Are you sure you are running the ribbon cable over the Pi and not the opposite way? Please post a picture of your setup. Checking your soldering is also...
View ArticleClik here to view.
New Artwork for Picade Cabinet
Put together my Picade today. No issues and all works well. My next thing is add a petrockblog.com power block, a 12.1 inch screen, and change the joy stick ball to the one below.
View ArticlePi Zero, Adafruit 2.8Tft, Phat Dac
Hi all, thanks in anticipation. Is it possible to connect as one bundle these three items? I can understand connecting the Pi zero to the DAC, or to the display but I really would like all three...
View ArticlePi Zero, Adafruit 2.8Tft, Phat Dac
try using a black hat hacker or solder a stacking header to the phat doc and then the display on top.
View ArticleClik here to view.
Black Hat Hack3r does not work
First of all: thank you all so much for answering me! I tried to run the code RogueM suggested, this is the result://Hardware Revision : a01041Revision match: Pi 2 Model B Rev 1.1Linux raspberrypi...
View ArticleClik here to view.
Clik here to view.
Pi Zero, Adafruit 2.8Tft, Phat Dac
The documentation for the 2.8" display on the Adafruit shows the pinout. You should be able to see what pins they may share and if that is an issue. 2.8" Display pinout Snip:"This design uses the...
View ArticleBlack Hat Hack3r does not work
I can't see anything wrong with your setup. However you will not be able to use the black hat hacker with the hats/phats you said as they share some pins.(pin25 & 24) however if they are not...
View ArticleBlack Hat Hack3r does not work
thank you for answering :) The pi is up to date. It is just so weird that it does not turn on at all when the Hack3r is attached..
View ArticlePi thinks unicorn hat is a phat
just updated my unicornhat libary and ran the new detect program and it says my height isn't = to my width which it isn't and now all the examples run as a phat format
View ArticlePi Zero, Adafruit 2.8Tft, Phat Dac
I think those (optional) GPIO broken out for the switches are for the original PiTFT... the new one uses BCM 17, 22, 23 and 27. As such it is a better fit since there will be no overlap with the pins...
View ArticlePi thinks unicorn hat is a phat
Thanks for the heads up, we'll look into it ASAP. Remember that you can override the detection and enforce the HAT layout with: unicornhat.set_layout(unicornhat.HAT) a bit of a pain I know, but may...
View ArticlePi thinks unicorn hat is a phat
the weird thing is however that when in shell I run the function that tells you the dimensions of the display it says (8,8)
View ArticlePi thinks unicorn hat is a phat
I just had a look and the process uses device-tree detection to see if a HAT is present. This will only work if you booted the Pi with the HAT already fitted... I'm willing to bet it's your problem.
View ArticlePi thinks unicorn hat is a phat
great. That's slightly annoying but will try that and be back.
View ArticlePi thinks unicorn hat is a phat
great, remember you can always enforce the layout in your code if you tend to swap HATs on the fly.
View Article