Black Hat Hack3r does not work
I can see some copper exposed in a few places... one in particular sits inbetween 2 traces and could very well be shorting the 5v with the 3v3 rail. Personally I would be very careful using this Black...
View ArticleBlack Hat Hack3r does not work
hey, thank you for your answer.though I am not sure I understand what you mean.. do you mean the soldering? could you be more specific please?thanks
View ArticleBlack Hat Hack3r does not work
No, I'm talking about the plane: pin 1, carrying 5v and pin 2, carrying 3.3v run side by side. On close-up, there is what seems to be exposed copper between the pin headers further away from the Pi.
View ArticlePi zero header soldering botched up!
Looks like you'll need more than a solder sucker and will probably damage the board with all the heat needed. I would suggest getting another Zero as they only cost £4. In future remember apply the...
View ArticleUSB Memory Stick for RPi
Hi there me hearties,I have built a time lapse camera with my Pi Zero, Zero Lipo, Pi NoIR Camera, some IR LEDs etc. The battery is a 2500 mAh and so should last a day or so and the system is set up to...
View ArticleUSB Memory Stick for RPi
well make sure the format of the memory stick is FAT and then just plug it in.Then change the path of the saving in your code to where the memory stick is located. Will
View ArticlePi zero header soldering botched up!
Hi You're probably right but it would be good practice for another time when it isn't quite so bad Cheers Paul
View ArticlePi thinks unicorn hat is a phat
This is the result of the autodetect feature I merged in recently. Unfortunately like all other HAT-eeprom features it needs the HAT placed on the Pi before booting in order to work- as @RogueM...
View ArticlePutting together Pi 3 B Adafruit 2.8 tft and PiBow PiTFT+
I don't believe it's possible to combine the original 26-way GPIO PiTFT with the Pibow made for the PiTFT+... at least not without delicate modifications (if at all possible). ... sorry to be the...
View ArticlePutting together Pi 3 B Adafruit 2.8 tft and PiBow PiTFT+
To be clearer... if your TFT has a 26-way header that's not the model intended for a Pi3 and Pibow PiTFT+ case. If you ordered the wrong display from us relatively recently, it may be worth contacting...
View ArticlePutting together Pi 3 B Adafruit 2.8 tft and PiBow PiTFT+
Not good news, but thanks anyway.
View ArticlePutting together Pi 3 B Adafruit 2.8 tft and PiBow PiTFT+
I bought the display from Maplin and cannot send it back as I have lost the packaging, I did buy the PiBow case from you.
View ArticleDo Headphones cause damage to PHAT DAC?
Suggestions for an ALSA compliant H264 player? Have refreshed an old bbc iplayer project which revolved around OMXplayer and now have added phatDAC am all muddled. Tar muchly!
View ArticleDo Headphones cause damage to PHAT DAC?
Or perhaps I could just try looking under this handy traffic cone...
View ArticleIntroduce yourself!
Hi I'm Graham "FutureTense"15 years embedded C using PICs with LCD displays on my own hardware. Looks like Pi can do it better and cheaper, so I'm making the transition.I may need a lot of initial...
View Article7" LCD with Pi3, using images from SD Card
Exactly as title - I currently use a PIC32 and SSD1963 to display 800x480 24 bit images which take around 5secs to load due SPI limitations. Can the Pi do a whole lot better?I'd like to know before...
View ArticleKey Mapping for GNGEO PI (NeoGeo 0.138 romset)
I was curious to see if anyone knows what keymapping to put in for GNGEO PI on the Picade. I tried to figure out what keys are being used by pulling up JSTest but it does not tell me. If anyone know...
View ArticlePi zero header soldering botched up!
Solder wick will work and is the best thing to use. However it sounds like you are not using it correctly. First of all it needs to be at least 5mm wide. Next put it down on the bench and put your...
View ArticleRaspberry Pi3 & Display-O-Tron HAT
Hi Guys,My first post, I'm new to all this R-Pi stuff,(Lots of PIC experience tho!) looks fun! All I need to know at the mo is, does the R-Pi3 play nice with the Display-O-Tron HAT? Cheers
View Article