Clik here to view.
Clik here to view.
ESP IoT pHAT problems
RogueM: minicom -b 115200 -o -D /dev/ttyAMA0 Same happens with 115200b i cant type anything :(if the chip is blank the resets wiped out the firmware i guess, and since i cant upload new, i cant use it...
View ArticleTrouble Installing Blinkt pHat
Thanks rogueM I will give it another go tonight. Thanks for quick response!
View ArticleESP IoT pHAT problems
The pHAT uses a ESP-12 and is wired appropriately for flashing, exactly like what's pictured there. There is no reason you couldn't wire a button to force a reset, but the output of the flash script...
View ArticleESP IoT pHAT problems
i test another psu 5v 3A that i use to drive my pi3 OSMC, and set sleep to 5 sec in the flash script and it still make the error :( Chip is in write modeErasing flashesptool.py...
View ArticleESP IoT pHAT problems
Are you able to post a picture of your setup? ... perhaps it will spark a further thought, but otherwise I'm out of ideas I'm afraid :(
View ArticleSoftware to use for picade
What it is we have built out picade joystick controller unit and have it attached to a pi3 but we can't get it to load or even understand how to program the sd card so it will run we didn't buy a...
View ArticleClik here to view.
ESP IoT pHAT problems
I tested the setup at the tv by hdmi and did take some pictures, m not sure thats what you requested? IMG_1912.JPG3024x4032 1.56 MB IMG_6344.JPG4032x3024 2.11 MB IMG_3215.JPG3225x2419 2.27 MB
View ArticleSoftware to use for picade
https://github.com/retropie/retropie-setup/wiki/First-Installation maybe this will help if you want retropie which is for picade and this...
View ArticleSoftware to use for picade
Which software program would be the better one to use out of the two programs so the picade works best and will respond to the games we end up downloading
View Article7" LCD with Pi3, using images from SD Card
The official Pi Touchscreen is connected via the DSI connector on the Pi itself. The signal from the Pi to the display board is DSI ( Display Serial ) and then converted on the display board to DPI (...
View ArticleSoftware to use for picade
retropie as that is what your meant to use for picade and is built for games
View ArticleTrouble Installing Blinkt pHat
Been trying constantly all day with no luck. I have cloned the github repo, how do i now install as jsut running the python scripts produce and error. Apologies for noob questions!
View ArticleRaspberry Pi Zero and Unicorn Hat
Hi,after making my first experience with the Unicorn Hat on a Raspberry Pi 2, I wanted to move to a RPi0, because of the smaller footprint. At first, the Unicorn Hat didn't want to work as usual. Only...
View ArticleColor transfer with EnviroPHAT and UnicornPHAT
To test the new Enviro PHAT color sensor, i though i could couple it with the Unicorn-PHAT with its RGB-LEDs. You need:- 2 Raspberry Pi (i tested with two pi zero)- Enviro PHAT- Unicorn PHAT Install...
View ArticleClik here to view.
Software to use for picade
You really should download the newest image of retropie. Below are the links. You need Win32 Disk Imager to put the RetroPie OS on the card. sourceforge.net Win32 Disk Imager Win32 Disk Imager...
View ArticleNo power to Picade screen - PLEASE HELP!
No, the power indicator light would be on if it was just asleep. -Brent
View ArticleNo power to Picade screen - PLEASE HELP!
Have you tried a separate power supply yet? -Brent
View ArticleTrouble Installing Blinkt pHat
cd into the library folder then run: sudo python setup.py install (replace or replicate using python3 if your preference is for python 3)
View Article