ESP IoT pHAT problems
HiIm having some annoying issues with my new ESP iot pHATwhen i try to go minicom to use the AT commands im no longer able to type in the main window, i can press CTRL-A Z for help, and change stuff...
View ArticleRaspberry Pi3 & Display-O-Tron HAT
Yes it does :D The same should apply to all HATs in fact.
View Article7" LCD with Pi3, using images from SD Card
I suspect the Pi can do considerably better, I haven't driven anything quite as big as 800x480 with 24bit images, however. You'd need something on the order of a 10Mhz bus speed to get 1fps if my...
View ArticleRaspberry Pi3 & Display-O-Tron HAT
I thought that it would, needed to be sure before parting with my hard-earned!Thanks.:-)
View ArticleESP IoT pHAT problems
What happens if you try to flash the AT firmware back by running the flash-at-firmware.sh ... when I get to the lab I'll check that the current MP night build causes no issue but that's a possibility....
View ArticleESP IoT pHAT problems
i tried downloading fw from adafruit micropython and unzipping it to be flashed, its the same issue. i edited the flash-at-firmware.sh # out the part where it downloads and deletes, to use the one it...
View Article7" LCD with Pi3, using images from SD Card
Hi GadgetoidThanks so much for the instant response. I have been using VGA to date, transitioning from 320x240 to 800x480 with SSD1963 and the boss says too slow. Newhaven display clocks at 50KHz...
View ArticleESP IoT pHAT problems
hum, it sounds like you don't have the latest repo firmwares, there is no need to edit anything in the AT firmware script, we supply the exact same one as we ship currently and no download is taking...
View ArticleESP IoT pHAT problems
another thing that comes to mind though is: how are you powering your Pi Zero? if you are starving your Pi+ESP then it's quite possible that some pins state can't quite be set 'high'. This would...
View ArticleClik here to view.
ESP IoT pHAT problems
RogueM: curl -sS get.pimoroni.com/iotphat | bash i tried the curl and replaced all files, im running my zero on a 5v2A powersupply, still no luck :( i would like to reset the pin manually is that...
View ArticleESP IoT pHAT problems
... if you are sure that you did not enforce a state on pins that are not broken out on the pHAT I'm not convinced your issue is of that nature. There's really is no reason you'd end up with such...
View ArticleTrouble Installing Blinkt pHat
Hi all, Im having issues installing the blinkt pHat. I run the following command: sudo curl -sS get.pimoroni.com/blinkt | bash however the script bails out when installing the Blinkt! library for...
View ArticleESP IoT pHAT problems
When i flash it, the FirmWare LED blinks several times and all looks okay in terminal untill it pops at the end and tells the invalid head of packet ('\x04') error.. what i did was i followed the...
View ArticleCCTV kit - Little Bro
Hi, I have recently bought the CCTV kit (Little Bro) and am trying to get it up and running. I've got the hardware together and can use SSH to access it without a problem. however I've tried to find...
View ArticleESP IoT pHAT problems
right, but you must use a baud rate of 115200, 9600 won't work I would suspect.What happens if you use minicom -b 115200 -o -D /dev/ttyAMA0 ... I can't explain why you can't reflash though, that...
View ArticleTrouble Installing Blinkt pHat
PyPi, where our libraries are hosted has been temperamental lately. The best advice I can give you is to try again every few hours. Failing that you can try cloning the gothic repo and install...
View ArticleKey Mapping for GNGEO PI (NeoGeo 0.138 romset)
Well I guess I can use IR-FBA-Next. That works great for Neo Geo
View ArticleNew Artwork for Picade Cabinet
(post withdrawn by author, will be automatically deleted in 24 hours unless flagged)
View ArticleClik here to view.
Clik here to view.