10.1" inch screen shim template
Here you go. https://github.com/pimoroni/picade/raw/master/picade-docs/Picade-Retail-BYO-Art.pdf Alhtough it is actually for a 12" screen
View Article12.1 inch screen question
HI. Can you confirm if the 12.1" LCD screen has a screen protector covering it or not? It certainly 'looks' like there is a protector on it but it seems pretty well glued on. Seems to be 2 separate...
View ArticleStrange blinking line at top of 7" screen
For some reason, several attempts at getting NOOBS installed on the 32GB SD card failed - and yes I scoured the net quite thoroughly and came up with 2-3 different methods of getting the card...
View ArticleThird Hand Problem - not able to get it working (ha lol)
Thanks Jon, third had works fine now, with your help.
View Article2 player PICADE
Has anyone tried creating a 2 player PICADE setup? Would the following work? 2 PICADES1 Raspberry Pi with HDMI output going to both screens (splitter)1 PICADE USB setup as Player12nd PICADE setup as...
View Article2 player PICADE
Totally possible! Another route would be to match a Picade with a Picade Console which would give a second set of controls but with a shared screen. Just connect the Console to the Pi in the main...
View Article12.1 inch screen question
Could you drop us a photo showing the layers? I'm slightly intrigued by the description...
View ArticleThird Hand Problem - not able to get it working (ha lol)
It was a struggle but we got there! :-)
View ArticleTrouble with the 18-Channel 8-bit PWM LED Driver w/ I2C Interface (SN3218...
I am also working on the same. According to me the LED is the wrong way 'round, which is an extremely easy mistake to make and also it is quite disingenuous at first glance.The PWM LED Driver is a...
View Article7" screen with Stand - comments suggestion
Problem with the PI B+ (expect that the same would have happened with the PI 2 had both connected to the display.) Have lifted the USB (A) from the display board still works to power the PI. Caused...
View Article12.1 inch screen question
I think you should be careful with this, from the specs I can tell that there is a resistive touch control layer. you shouldn't remove this thing unless you have no plans of using that feature. may I...
View ArticleClik here to view.
12.1 inch screen question
I Got the 12.1 Inch screen from Pimoroni (signed up to stock alerts as they are hard to get hold of). Please see the pics attached. screen1.jpg1152x2048 338 KB screen3.jpg1152x2048 434 KB
View Article12.1 inch screen question
That is the touch overlay - it's best not to remove it! We are looking at a new 12" screen option that should have better availability - more info soon!
View ArticleRun out of ideas why I have no sound
FYI: jonNinja That is the touch overlay - it's best not to remove it!
View ArticleRun out of ideas why I have no sound
I thought it didnt look like it should be removed. Thanks for the update.
View ArticlePowering Skywriter with 5V
Thanks for the quick response! Stupid me: I should have just checked on the back of the PCB, where it clearly states VCC 3.3V - 6VBest regards, Frederik P.S: I just can not state enough, how in love I...
View Article7" touchscreen rpi 2
hi having received my shiny new screen yesterday, i have connected it all up and ensured that all the connectors are fully seated, also flashed the latest rasbian (jessy) onto the sd card, booted on...
View Article7" touchscreen rpi 2
You write "...booted on an external screen...".Is the external screen still connected?If so, disconnect it, and then it should work.
View Article