Clik here to view.
Clik here to view.
Clik here to view.
Clik here to view.
Clik here to view.
Trinket Boot mode
I'm using a Lenovo W530. Just tried it through a powered hub, still getting the "USB device not recognised" message. Do you think it is the specific trinket I have or my PC set-up that is the problem?...
View ArticleUnable to interract with the Dock
It gets weirder and weirder. By just fiddling I have managed to get the slider working with the matrix, but if I then open another tab and try to run a cookbook recipe, the page loads but is instantly...
View ArticleClik here to view.
What improvement could be done on the Picade
Thanks. Here's the links: Powerblock I got from:http://blog.petrockblock.com/gadgets/powerblock-another-power-switch-for-the-raspberry-pi/ It came from Germany and took exactly 3 weeks to arrive in...
View ArticleFADO lamp IKEA Hack with Blinkt! (including Minecraft server monitoring)
Yes that is the adapter.Really great for the PiZero and it reduce the cable mess as the Ethernet can be far from the PiZero.
View ArticleESP8266 IoT pHAT standalone use kit?
Is there a market for an ESP8266 carrier that would provide it power for standalone use...I mean use without the Pi.It would just provide power and whatever is needed over a 40 pin connector.One could...
View ArticleFADO lamp IKEA Hack with Blinkt! (including Minecraft server monitoring)
totally going to try this for my A+. 850mA tops though, so will limit what blinks you can add. Edit: err, won't work with an A+, of course.
View ArticleESP8266 IoT pHAT standalone use kit?
I am building a ESP IoT pHAT with Zero LiPo. I used a 26-way (but 40-way would work too) stacking header. ... not quite there so can't comment on exact details, but there's no reason it wouldn't work....
View ArticleNo power to Picade screen - PLEASE HELP!
It sounds like the screen isn't recognizing the input from the Pi and is going to sleep. On my 8" Picade screen, I had to press one of the buttons (can't remember which one) on the screen button board...
View ArticleNo power to Picade screen - PLEASE HELP!
Thanks for answering back. I've had some contact back from Pimoroni who have suggested playing with the ribbon cable a bit, so I'll try that as well as your suggestion too. Would that still work even...
View ArticleDo Headphones cause damage to PHAT DAC?
Does plugging in headphones cause permanant damage to a PHAT DAC card? I was using headphones at first and not getting any sound after doing all the setup steps I could find. I have the PHAT DAC...
View ArticleCannot connect to the dock!
That certainly seems to be working now. On another note, I cannot get the colour or motion modules to do anything! Is there any guidance on how all these modules behave and how we can use them please?
View ArticleUnable to interract with the Dock
Did the process confirm that the firmware was at version 1.14? If so your dock might be spitting out data that confuses rockpool... try the following: sudo service flotillad stop /usr/bin/flotilla -d...
View ArticleDo Headphones cause damage to PHAT DAC?
Most likely the sound is not routed adequately. But for us to be able to help you need to tell us more about the steps you have followed thus far, and whether you are using Raspbian with or without...
View ArticleUnable to interract with the Dock
Thanks RogueM, tried that. Everything seems OK as the dock and i/p and o/p I've connected are noted, but the last line says Segmentation fault.
View Article