Clik here to view.
My Pitendo.....Please share your thoughts
OK here is an update. Today my USB 5V to 12V Barrel cord USB 5v to 12v barrel cord came in. When I combined it with the Quick Charge 2.0 RAVPower 40W 4-Port USB Quick Charger using the green port...
View ArticlePibow audio with DAC+ & IR reciever
hello, i have been a fan of the pibow since i cut my first one at my local library out of the pattern available on thingiverse. i recently assembled the pibow i ordered last month, and im having an...
View ArticleBlack hat Hack3r build question
I would like to build a digital camera and would like to use the enviro pHAT, the Black Hat Hack3r and the 2.4 inch tft touch screen together with a RPi Zero. I've never really done much hacking of...
View ArticlePimoroni 4º birthday discount
The zero is a freebie, so yes, even if your order includes one you'll still get the extra. Promos last until Monday night. As for your other questions, when going through checkout, you will see...
View ArticleClik here to view.
Turning the UnicornHAT round 'pixels' into square ones
@defsdoor @LimeBlast I forgot to come back and update this thread with my results: 3D Printing Show & Tell Version 2: White ABS with vinyl plastic diffuser (instead of paper). [image][image]...
View ArticleBlack hat Hack3r build question
Yup, just grab one of of these and solder it in place of the set of pins that would attach to the ribbon cable....
View ArticleBlack hat Hack3r build question
Yes, that's right, although I tend to use a standard female header for the middle connector (on the underside obviously). This gives me a 2 seater that overhangs the Pi roughly equally on both sides....
View ArticleClik here to view.
Black hat Hack3r build question
Here goes: image.jpeg1936x1936 852 KB and example pHAT+HAT image.jpeg1936x1936 1 MB ... you could swap the female header for a stacking version, but you wouldn't get much benefit if what you wanted to...
View ArticleI think my pi zero is defective (usb ports not working)
There are so many things wired up to that pi, with no clear overview of what goes where, that it would be difficult to spot all relevant parameters to take into account in my response. ... keeping it...
View ArticleI think my pi zero is defective (usb ports not working)
OK, I have tracked down the tutorial which I believe you have followed?https://learn.adafruit.com/pigrrl-zero/usb ... I strongly urge you to use colour-coded wiring in the future, and at the very...
View ArticleClik here to view.
Pimoroni 4º birthday discount
I see, the cart isn't exactly explicit, however it has been clarifed here that's how it works: twitter.com Adam (BytesGuy) @pimoroni is the value for the free zero and blinkt over £100 _before_ the...
View ArticleClik here to view.
Anyone tried Lakka? It's like Retropie
I have, albeit very briefly. It's reminiscent of the XMB from the Playstation/PSP. Quite nice! Although I haven't had enough time to play with it more.
View ArticleWhen is flotilla available for buying
Do you intend to add further modules to the flotilla range? I would very much like a humidity sensor preferably with a temperature sensor.
View ArticleUnable to download 10 iot
Get an error message that it gets an error downloading ISO to the SD card.It's downloading from: http://software-download Microsoft.com/
View ArticleWhen is flotilla available for buying
I believe such plans do exist... additional modules I mean, what they will be will depend on what seems to be the most common requests.
View ArticleUnable to download 10 iot
according to these instructions you do not burn the ISO, but instead use a MSI to flash a pre-imaged ffu files: https://developer.microsoft.com/en-us/windows/iot/win10/GetStartedManually.htm And, yes,...
View ArticleScroll-phat problems
Hi All, thank you for your feedback- after buying some solder wick and re-soldering a few of the joints I have found the problems is is that the x2 male header have been soldered in an a slight angle....
View ArticleScroll-phat problems
Hey, we've all been there! when you come to do it again, lay a slab of blu tack folded in half on your bench and stick the header upside down to its side (so not inside the slab, just pressed against...
View Article