12" Picade Screen
i'm sure if you asked the Pimoroni Guys nicely they would send you a 12" surround. personally i've just used one of the templates on the forum and printed my own surround. or you could use back card...
View ArticleWhat improvement could be done on the Picade
About mounting the pibow case, I got a pibow coupe and simply left the very bottom clear plate off and used the supplied nylon bolts to secure it to the picade door. The door basically acts in the...
View ArticleFlotilla project seems to have stalled
Would love to get an update, too. Of course we can fiddle out some tricks and projects by ourselves, but that was not the deal, right? At some point I just want to say 'Hey, lets build this today!'
View ArticleNew Unicorn Hat not working
I think there is a value trying with the HAT off. If nothing else we'll know whether the error occurs regardless of this particular unit being used.
View ArticleCapacitive touch hat not working always
That seems like a strong possibility. Please send support@pimoroni.com an email and they'll sort out a replacement.
View ArticleShould the internal speakers be off when headphones are plugged in?
Speakers should stop emitting when you plug headphones in. It sounds like the switch on the 'phones' side is jammed, did you have to touch that one up or only the side reserved for the source?
View ArticleShould the internal speakers be off when headphones are plugged in?
I didn't not need to mess with that side. I visually checked it and tried to physically wiggle it and it seems pretty solidly connected. It definer lowers the sound volume when phone are connected so...
View ArticleShould the internal speakers be off when headphones are plugged in?
It is handled by the firmware, but there's a physical switch that closes/opens what I understand is basically a voltage divider. Both cases, stuck open and stuck closed, can sometime occur. If yours...
View ArticleShould the internal speakers be off when headphones are plugged in?
You're right, lowering the volume has no affect on the headphone port, that's a pretty tolerable solution, still scratching my head as to why the speakers don't shut off. If there are another other...
View ArticleShould the internal speakers be off when headphones are plugged in?
Hi I've just built my Picade and I have a similar issue. With the volume turned down the sound only comes out of the headphones but as the volume is increased it starts to come out of the speakers as...
View ArticlePhat Dac Picade Help
Hi I'm having the same issue with Mame but I don't think this is something Pimoroni can fix. I have posted on the RetroPie forum to see if they have a solution. I don't however have your other issue...
View ArticleShould the internal speakers be off when headphones are plugged in?
At least I'm not alone!
View ArticleClik here to view.
Should the internal speakers be off when headphones are plugged in?
Paulcheffus: With the volume turned down the sound only comes out of the headphones but as the volume is increased it starts to come out of the speakers as well as the headphones. That, by itself, is...
View ArticleHelp with Pi Pan/Tilt Face tracker
Thank you, just tried this, it installed fine, then ran: sudo ./facetracker.py Response now: Traceback (most recent call last): File "./facetracker.py", line 4, in <module> from pantile import *...
View ArticleNew Unicorn Hat not working
I get the same error when the Hat is off. Hmm, what tells us that? Obviously the hardware and software requirements are met: It's a Raspi 2, with Raspbian Jessy installed, with all the software up to...
View ArticleNew Unicorn Hat not working
I don't think the HAT is the culprit, I do not get that error (or any error) running that script on a bare Pi. I tried with 3 different ones now, just to be sure, using a clean but updated Jessie. I...
View ArticleHelp with Pi Pan/Tilt Face tracker
what Pi is this on, and running what version of Raspbian (or other OS should that be the case)?
View ArticleHelp with Pi Pan/Tilt Face tracker
Raspberry Pi 3 Model B Running Raspbian GNU/Linux 8 (jessie)
View ArticleHelp with Pi Pan/Tilt Face tracker
yes, I have the same. The problem is the probe for board revision not being adequate for the Pi 3. I would simply comment out line 36 and uncomment line 35 in Adafruit_I2C.py, so that the init method...
View Article